High Pressure gate valve SD75 - AT750
Technical data
Through conduit execution Lug type knife gate valve for installation between flanges acc. to EN 1092-1/ PN 2.5-PN 160. Also suitable for deadend service. Valve up to PN 160 for dewatered sewage sludge, thick matter and biomass. Completely round and smooth bore, special lengths and nominal sizes possible. Two-piece body, bidirectional tight shutoff. Metal guided plate embedded protected against pressure shocks. COMPACT cross seal. Optional: secondary sealing, readjustable from the outside.
Face-to-face dimension According to e.g. EN 558-1 line 20/25/16 (DIN 3202 K1/K2/K3)
Body Steel, Stainless Steel
Coating EKB, both inside and outside
Colour RAL 9005, electrically conductive
Plate Stainless steel 1.4301, 1.4571, 1.4462, etc.
Sealings NBR (EDPM, FPM, MVQ, etc.)
Certifications CE-Marking, FDA approval, ATEX
Applications and Industries
Sludge drying (->Application example)
Sludge transport
Sewage sludge incineration
Digested sludge
Thick sludge
Thick materials
Battery recycling
Lithium recycling
Vacuum applications
Organical fermentation plants
Waste-to-energy plants
Waste incineration plants
Sewage plants
Biogas plants
Chemical industry
Product Information - Klärschlammprospekt AT750/300 (GB) (2.46 MB) Request CAD
Technical data sheets available on request